DIY Hairpin Legs Hairpin Legs Set of 4 - 3 Rod Hairpin Legs
Set of 4 Hairpin Legs, 3-Rod Design
DIY Hairpin Legs Hairpin Legs Set of 4 - 3 Rod Hairpin Legs
DIY Hairpin Legs Hairpin Legs 16" / Raw Steel / 3/8" Set of 4 - 3 Rod Hairpin Legs
DIY Hairpin Legs Hairpin Legs 28" / Raw Steel / 3/8" Set of 4 - 3 Rod Hairpin Legs
DIY Hairpin Legs Hairpin Legs 16" / Jet Black / 3/8" Set of 4 - 3 Rod Hairpin Legs
DIY Hairpin Legs Hairpin Legs 16" / White / 3/8" Set of 4 - 3 Rod Hairpin Legs
Set of 4 Hairpin Legs, 3-Rod Design
Set of 4 Hairpin Legs, 3-Rod Design
DIY Hairpin Legs Hairpin Legs Set of 4 - 3 Rod Hairpin Legs
Set of 4 Hairpin Legs, 3-Rod Design
DIY Hairpin Legs Hairpin Legs Set of 4 - 3 Rod Hairpin Legs
DIY Hairpin Legs Hairpin Legs 16" / Raw Steel / 3/8" Set of 4 - 3 Rod Hairpin Legs
DIY Hairpin Legs Hairpin Legs 28" / Raw Steel / 3/8" Set of 4 - 3 Rod Hairpin Legs
DIY Hairpin Legs Hairpin Legs 16" / Jet Black / 3/8" Set of 4 - 3 Rod Hairpin Legs
DIY Hairpin Legs Hairpin Legs 16" / White / 3/8" Set of 4 - 3 Rod Hairpin Legs
Set of 4 Hairpin Legs, 3-Rod Design
Set of 4 Hairpin Legs, 3-Rod Design

Set of 4 Hairpin Legs, 3-Rod Design

$37.99
Need help picking the right legs? Live Chat with us now!

We offer all of our heights and finishes in a set of 4, bundled for you at a discounted price. If you are looking for single legs or 1-3 units, check out our Individual Hairpin Legs, 3-Rod Design.

With these timeless hairpin legs, you can create a mid-century modern statement piece, live-edge table or turn a stump, a piece of plywood or pallet into a piece of furniture. Formed and welded by our team in the USA.

We care about making a quality product that you can be proud to put on a piece of furniture in your home, at your office, or better yet, on something that you’re making for someone else. Through our own personal experiences, we know the connection that can be created by making a special piece, so we take the utmost care to make our legs special for you.

  • LARGEST SELECTION: We offer sizes from 4" to 40". Find the perfect height hairpin legs for your custom build!
  • COMMERCIAL GRADE: Built for professionals, designers, makers and DIYers alike.
  • HIGHEST-QUALITY STEEL: We use cold rolled steel instead of hot rolled steel for a higher-quality finish and stronger legs.
  • SOLID WELDS: Creates super strong hairpin legs that will last you a lifetime.
  • SUPPORTS HUNDREDS OF POUNDS: Each of our legs were built to support hundreds of pounds of pressure. We've even welded them to a car, and they did just fine!
  • POWDER COATED: Unlike most hairpin leg companies, we powder coat all of our colors to provide the best finish, using only the best materials.
  • LEGS SHIPMENT: 
    • Raw steel products ship 5-7 business days after order is placed.
    • Powder-coated products ship 7-10 business days after order is placed.

Floor Protectors now included (a $7.99 value)!

FREE Maintenance Kit with each set of Raw Steel Hairpin Legs:

For all raw steel products, we include one maintenance kit with an order of a set of legs (four legs). This kit includes: (1) Wax - To polish your legs and protect them indoor wear and tear, (2) Applicator pad, (3) Screws (#8-11 x 1-1/4" Phillips Pan Head Coarse Thread Black Phosphate/Wax Screws) to attach the legs, (4) Raw steel maintenance instructions so your legs endure over time.

Note: Bulk orders do not ship with kits.

  • Raw steel products ship 5-7 business days after order is placed.
  • Powder-coated products ship 7-10 business days after order is placed.
  • Expedited shipping service available.
  • You will receive a shipping confirmation and a tracking number for your order.

Baseplate/Mounting Bracket Dimensions:

Rod/Wire:

  • 3/8" Diameter (Leg Thickness) 1008 Cold Rolled Steel⁠—Great for standard projects.
  • 1/2" Diameter (Leg Thickness) 1008 Cold Rolled Steel⁠—Heavy-duty, best for heaviest of projects.


  • Customer Reviews

    Based on 804 reviews
    98%
    (785)
    2%
    (13)
    0%
    (3)
    0%
    (0)
    0%
    (3)
    S
    Stewart Locklear
    Strong, sleek, modern

    These legs were exactly what I needed. We built a 4x8 table for an O-scale electric train. There are a lot of designs out there and most of them are homely if not downright ugly. We really wanted something that would enhance our basement entertainment room not detract from it. I kept seeing these hairpin legs over and over again but wasn't sure it was the right thing for us. But when I received reassurance that they could handle well over 800 pounds and perhaps up to 1000 pounds, I took the plunge. We used red oak plywood for the tabletop. One solid sheet forms the tabletop. Underneath we glued and tacked on six inch wide supports every 2 feet along the width and 2 - six inch wide supports going along the length of the table. The legs attached perfectly. Now all we have to do is build the scenery. Definitely a great purchase!

    V
    Vance Dippold
    Handsome Hairpin legs

    After not finding a table I liked for my children to use for schoolwork and art projects, I decided to make my own with a 3 ft-by-3 ft butcher block countertop. I found DIY Hairpin Legs and ordered a set of 3-rod hairpin legs. I appreciated that I cool order legs in a shorter size (26") to create a table sized for my children. The hairpin legs were well-packaged, well-made, and included clear installation instructions. The hairpin legs helped complete our table project, and our new table looks great.

    K
    Kathleen Hetu
    Great Legs

    Being able to speak to a rep over the phone really helped with the 3 leg design for our revamped butcher block table. Thanks KH

    J
    Julian Jarboe
    Sturdy enough for a bed!

    I bought the three-rod, 1/2" legs hoping to use them on a bed, though I was worried the height I wanted to be too tall for stability. Nope! They are solid. I did use cabinet screws rather than the wood screws that came with them-- would recommend this as well for anything that has to withstand motion (seating and beds, etc).

    L
    Linda Gerard
    Purchase of the hairpin legs

    Absolutely 💯 satisfied! Beyond my expectations. Everything from the order to delivery to my new table was perfect. I have a very small space for a dining table so we built one. It is perfect! I'm not sure how to add a picture but would love to send one. Thank you!

    Customer Reviews

    Based on 804 reviews
    98%
    (785)
    2%
    (13)
    0%
    (3)
    0%
    (0)
    0%
    (3)
    S
    Stewart Locklear
    Strong, sleek, modern

    These legs were exactly what I needed. We built a 4x8 table for an O-scale electric train. There are a lot of designs out there and most of them are homely if not downright ugly. We really wanted something that would enhance our basement entertainment room not detract from it. I kept seeing these hairpin legs over and over again but wasn't sure it was the right thing for us. But when I received reassurance that they could handle well over 800 pounds and perhaps up to 1000 pounds, I took the plunge. We used red oak plywood for the tabletop. One solid sheet forms the tabletop. Underneath we glued and tacked on six inch wide supports every 2 feet along the width and 2 - six inch wide supports going along the length of the table. The legs attached perfectly. Now all we have to do is build the scenery. Definitely a great purchase!

    V
    Vance Dippold
    Handsome Hairpin legs

    After not finding a table I liked for my children to use for schoolwork and art projects, I decided to make my own with a 3 ft-by-3 ft butcher block countertop. I found DIY Hairpin Legs and ordered a set of 3-rod hairpin legs. I appreciated that I cool order legs in a shorter size (26") to create a table sized for my children. The hairpin legs were well-packaged, well-made, and included clear installation instructions. The hairpin legs helped complete our table project, and our new table looks great.

    K
    Kathleen Hetu
    Great Legs

    Being able to speak to a rep over the phone really helped with the 3 leg design for our revamped butcher block table. Thanks KH

    J
    Julian Jarboe
    Sturdy enough for a bed!

    I bought the three-rod, 1/2" legs hoping to use them on a bed, though I was worried the height I wanted to be too tall for stability. Nope! They are solid. I did use cabinet screws rather than the wood screws that came with them-- would recommend this as well for anything that has to withstand motion (seating and beds, etc).

    L
    Linda Gerard
    Purchase of the hairpin legs

    Absolutely 💯 satisfied! Beyond my expectations. Everything from the order to delivery to my new table was perfect. I have a very small space for a dining table so we built one. It is perfect! I'm not sure how to add a picture but would love to send one. Thank you!